|
|
|
The machines listed below are for currently advertised used machine tools or equipment matched against the Welding Rotators/Positioners type. The machine model, detailed machine description and technical machine attributes are listed.
Users can filter by Machine Control (such as CNC, Non-CNC, Hydraulic etc if appropriate).
Used Machine models are listed in technical attribute order within each machine type group to provide users with the clearest view of Welding Rotators/Positioners machine available.
Please register to receive Machinery Classified’s regular ezine which provides updates on machines currently available.
If you are not able to find the used Welding Rotators/Positioners for sale that you are looking for, please post a wanted advert free of charge. |
|
|
| | Category: | Welding Rotators/Positioners |
|
| Showing 1 to 9 out of 9 results | | |
| | |
| Model: | A&N Rotators |
| Description: | 60 Ton, Year 2006. Stock No: 12267. Model PR60/100, Capacity 60,000 kg, Pipe diameter 600 to 6500 mm, Control Voltage: DC 24 Volt control circuit, Incoming Supply: 380-440 V/3-phase/16 A/48/62 Hz, Rotation Speed: 130 to 1295 mm/min, Weight - Idler 1200 kg, Weight - Powered 2000 kg |
|
|
|
| |
| Model: | BODE |
| Description: | Lathe Welder positioner, Positionneurs, Posicionadores with Jetline Welding System and Controls. Key Features: This could all be removed to leave a Bode Powered Head Stock and Idler Rolls to support on vessel lengths up to 5000mm. Suitable for 1000kg without idler support. With idler support total rotating weight 2000kg. Photograph shows condition PRIOR to any work commencing. Stock No: 10782 |
|
|
|
| |
| Model: | Bode |
| Description: | 12 Ton Welding Positioner, Stock No: 12255. Variable Speed, Power Tilt, Larger tables in stock if required to suit this machine. |
|
|
|
| |
| Model: | Bode 20/VP |
| Description: | 1000kg Welding Positioner. Stock No: 12194. Power tilt,Table Rotation Speed 0.07 - 1 rpm, Maximum Load Table Horizontal 1500kgs. Remote control pendant housing. Forward/ Stop/ Reverse/ Tilt-up/ Tilt-down push buttons and Speed Control Potentiometer. Load Capacity 1000kg at 150 mm Ecc. & 150 mm C.o.G. |
|
|
|
| |
| Model: | Bode 250 KG |
| Description: | Welding Turntable Positioner , Positionneurs, Posicionadores. Stock No: 10289 . Variable Speed Forwards and Reverse. Manual Tilt, Table Diameter 600mm, Foot Control On/Off, Floor to Top of Table 1000mm, Mains Volts 240. |
|
|
|
| |
| Model: | Bode MPE Murex |
| Description: | Welding Positioner table tops/faceplates - various types and sizes includingT-slots sizes. Maximum diameter 2500mm. Stock No: 12294. |
|
|
|
| |
| Model: | BODE SAR 600 |
| Description: | 30Ton Welding Rotators ,1 powered unit and 3 idler unit. Bode Self Aligning Rotators provide an economical and practical answer to cylindrical vessel rotating problems. The unique design permits the rollers to align themselves. To the work piece without any manual pre-adjustment whatsoever and irrespective of ovality or irregularity. The vessel remains central to the frames irrespective of diameter, and frequent adjustment of the welding head becomes unnecessary. Instantly self-aligning to the work piece.Clutches incorporated in top rollers of drive section to prevent damage to transmission when loading.Variable speed rotation through hydrostatic variator. Minimum Diameter of Vessel 450mm. Maximum Diameter of Vessel 5200mm. Mains supply 415 volts |
|
|
|
| |
| Model: | BODE VP100 |
| Description: | 5 Ton Welding Positioner, Variable Speed and Power Tilt, Table diameter 1520mm, Height from floor to top of table 1650mm, Refurbished to order with new electrical controls and colour coded if required |
|
|
|
| |
| Model: | Welding Positioner 100kg |
| Description: | Bench type @ 800 GBP. Stock No: 12282. Variable speed and Manual tilt, Forwards and Reverse and Foot control with on/off. 320mm diameter Faceplate. Mains supply 240 volts. |
|
|
|
| | | Showing 1 to 9 out of 9 results |
|
|
|
|
|
|